PX4 Pixhawk Advanced Autopilot with M8N GPS

PX4 Pixhawk Advanced Autopilot with M8N GPS

Kode Produk:APT021
Harga: Rp.4.500.000,00

New version 2.4.5 foreign export tail, annex configuration in the original version of 3DR added PPM / SBUS adapter module, preset 3DR certificate can be directly through the MP ground station software upgrade firmware, will not prompt piracy, all IC, resistance Capacitors are in accordance with the public version of the production, resistance IC, etc. are all imported products, all resistance 1% accuracy, performance and stability, will not appear cyclical multi-axis body convulsions. Non-Taobao general product comparable.


Pixhawk Flight Control Package List:

1) flight control and housing * 1

2) 10s power module * 1 (3DR power module can be used)

3) unlock switch * 1 (consistent with the 3DR factory, light weight, easy to insert the case)

4) buzzer * 1

5) 4p to 4p silicone wire * 1 (for I2C)

6) 6p to 6p silicone wire * 1 (for power supply module)

7) mode optional patch * 3

8) TF card reader * 1

9) I2C distribution board * 1

10) damping cotton * 4

11) DuPont line * 1

12) Micro USB cable * 1

13) GPS M8N


A new generation of 32-bit processor flight control strong incoming, a board on the integrated PX4FMU + PX4IO

Open source products, once sold, do not return, if the quality problems, rework processing, do not provide one-on-one technical support. Please be careful to buy!

PIXHAWK integrates the latest 32-bit chip technology and sensor technology, out of the APM CPU is now only 8, CPU occupancy rate is too high dilemma.

Official link



1. Advanced 32-bit ARM CortexM4 high-performance processor, can run NuttX RTOS real-time operating system;

2.14 PWM / servo output;

3. Bus interface (UART, I2C, SPI, CAN);

4. Integrated backup power and failed backup controller, the main controller fails to switch to the backup control;

5. Provide automatic and manual mode;

6. Provide redundant power input and failover function;

7. Multi-color LED lights;

8. Provide multi-tone buzzer interface;

9.Micro SD records flight data;


Hardware parameters:


1.32 bit 2M flash memory STM32F427 Cortex M4 with hardware floating point processing unit

2. Frequency: 168MHZ, 256K RAM

3.32 bit STM32F103 backup coprocessor


1.L3GD20 3-axis digital 16-bit gyroscope

2. LSM303D 3-axis 14-bit acceleration / magnetometer

3.MPU6000 6-axis accelerometer / magnetometer

4.MS5611 high-precision barometer



1.5 UART 1 compatible high voltage, 2 with hardware flow control

2.2 CAN

3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input

4.Futaba SBUS compatible input and output

5.PPM signal input

6. RSSI (PWM or voltage) input



9.3.3 and 6.6VADC inputs

10. External MICRO USB interface

Tulis review

Note: HTML tidak diterjemahkan!

Jelek           Bagus

Facebook Comments ()