Bluetooth HC-05 Module Breakout

Bluetooth HC-05 Module Breakout

Kode Produk:MOD4954
Ketersediaan:Tersedia
Harga: Rp.100.000,00
Jml:  

Bluetooth Module Breakout HC-05

This version of the popular Bluetooth Breakout Board uses the HC-05 module. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target.

The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required. Do not attach this device directly to a serial port. You will need an RS232 to TTL converter circuit or Arduio XBee USB Adapter if you need to attach this to a computer. You can either solder a 6-pin header or individual wires.

Unit comes without a connector. Please see related male and female pins below.

And now, we provide HC-05/06, HC-05 could be setting to Master or Slave by user. HC-05 just be Master or Slave, that could be customized. This module default is HC-05 with Slave mode.

Specifications:

  • Bluetooth protocal:  Bluetooth Specification v2.0+EDR
  • Frequency:  2.4GHz ISM band
  • Modulation:  GFSK(Gaussian Frequency Shift Keying)
  • Emission power:  ≤4dBm, Class 2
  • Sensitivity:  ≤-84dBm at 0.1% BER
  • Speed: Asynchronous:  2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
  • Security:  Authentication and encryption
  • Profiles:  Bluetooth serial port
  • Power supply: +3.3VDC 50mA
  • Working temperature: -20 ~ +75 Centigrade
  • Dimensions: 15.2x35.7x5.6mm

 

Tulis review



Note: HTML tidak diterjemahkan!

Jelek           Bagus



Produk sejenis (2)

Facebook Comments ()